Hunza Pure LED Pool Lite IP68 Recessed Pool Light is perfect for illuminating any pool lighting project. CNC machined from 9mm thick marine grade 316 stainless steel, the fully waterproof Hunza Pool Lite is electro-polished to increase it's corrosion protection by 33%. Supplied with a tempered glass lens, high temperature silicon gaskets and a mounting canister made from engineering grade Wet Niche PVC, screwlessly secured with 2 'O' rings. Supplied with 6 metres of fully submersible cable, longer lengths available on request. 600mm of this cable can be coiled up inside the mounting canister, which allows for lamps to be changed above the water. Suitable for installation into fibreglass pools, new concrete pools and existing concrete pools. High performance CREE MTG-2 LED chip with plug and play system for easy replacement or upgrade. Available in 4 beam angles and 2 colour temperatures.
Remote driver required.
Delivery usually with 1 - 2 weeks
Lumen Output: 510 lm @ 1050mA
Lumens per W: 85 @ 6W
Beam angle: 15°, 25°, 38°, 60°
Light temperature: 2700K, 3000K, 4000K
Materials: Solid 316 Electropolished Stainless Steel
Ingress Protection: IP68
Standards: AS/NZS 61046, UL 676
Canister: Diameter:100m, D.315mm
Cable length: 6m
Remote driver required
NB: Pool chemicals that are not balanced may cause the fitting to corrode at a rapid rate. Salt water coupled with a water temperature increase of 10 degrees will double the corrosion factor. 316 stainless steel is suitable for installation up to 1000 parts per million of chloride. Excessive quantities of chlorine may be produced when using an automatic chlorinator.
For pool zone installation regulations please check with your Local Electrical Authority.
For further information please us on or
Diameter 125 mm.
Lamp Type: CREE MTG-2 LED
Ref No: PL/SS/S