30W Triac dimmable LED tape driver. 12V 800mA constant voltage driver for use with 12V LED tapes. Minimum load 10W required for dimming capability. These drivers can be dimmed to 5% using good quality, LED specific dimmers and can also be dimmed via many control systems such as Lutron, Rako and JCL.
If you require further assistance, please us on .
Output power: 30W
Output current: 800mA
On/No load voltage: 12V
Suitable for most leading/ trailing edge dimming
Constant voltage design
Protections: Short circuit/ Overload/ Over voltage
Built-in PFC function (PFC>0.95)
Cooling by free air convection
Up to 80% efficiency