LED Profilelement R10-F Plaster Profile | Image:1
LED Profilelement R10-F Plaster Profile | Image:1
LED Profilelement R10-F Plaster Profile | Image:2
LED Profilelement R10-F Plaster Profile | Image:3
LED Profilelement R10-F Plaster Profile | Image:4
LED Profilelement R10-F Plaster Profile | Image:5
LED Profilelement R10-F Plaster Profile | Image:6
LED Profilelement R10-F Plaster Profile | Image:7
LED Profilelement R10-F Plaster Profile | Image:1
LED Profilelement R10-F Plaster Profile | Image:1
LED Profilelement R10-F Plaster Profile | Image:2
LED Profilelement R10-F Plaster Profile | Image:3
LED Profilelement R10-F Plaster Profile | Image:4
LED Profilelement R10-F Plaster Profile | Image:5
LED Profilelement R10-F Plaster Profile | Image:6
LED Profilelement R10-F Plaster Profile | Image:7

LED Profilelement R10-F Plaster Profile

Manufacturer: LED Profilelement

£131

Description

LED Profilelement R10-F plaster-in profile with reflector wing for installation in the surface with or without substructure - not suitable for drywalls. Suitable for wall or ceiling installation, R10-F integrates invisibly with the surrounding architecture, and is the perfect choice for cove lighting and for creating dramatic indirect lighting effects. The curved reflector creates a calm flow of light. Suitable for use with LED tape up to 15mm in width. With peel bar for flush plastering, minimum plaster thickness 19mm. Shadow casting can be avoided by altering the plane that the LED strip is fixed to. Made of zinc, which acts as a heat sink for the LED strip, the R10-F profile is supplied with the primer already applied. Diffuser available for a softened, refracted lighting effect.

See the Optional Items below for:
The fleece lining for seemless installation (see install instructions)
The magnetic tape to fix the LED strips into place within the profile

Supplied in 2m lengths. 

Delivery usually within 3-5 working days 

See install instructions PDF in the Downloads tab.

Specification

Suitable for LED tape up to 15mm in width
Diffuser available
Pre-primed in white
Can be mounted on brick walls using mounting adhesives or screw anchors
Built-in peel bar for flush peeling of the stucco / plaster
Min. thickness of the stucco 19mm

Dimensions

Product dimensions: W.2000mm x D.19mm

Downloads
  • LED-Prof-install10
Delivery and warranty

Delivery usually within 3-5 working days

Supplied with a 3 year warranty

About the manufacturer

Flexibility. If there’s one word to sum up LED Profilelement, it’s flexibility. Whether creating indirect accent lighting, shadow gaps for coves and skirtings or highlighting architectural features, the versatility of LED Profilelement flows from soft and subtle integrated lighting to a striking, dramatic statement.

Installed directly into the drywall, many of the profiles are either plaster-in or with a paintable wing - seamlessly integrating into the architectural scheme whilst taking advantage of the latest in LED innovations. As we said - flexibility.

Got a question? Email us or call

You may also need…

Other members of the family

It's good to be in the know



© 2019 Copyright Dark Light Design Limited. All rights reserved.

Registered Office:
Thor House, 49 Guildford Road
Bagshot, Surrey
United Kingdom, GU19 5NG

Company number: 07006711


Website by: